|
|
|
Kto jest w sklepie?
Sklep przegląda 6025 gości |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Instrukcja Serwisowa jest kompletna i czytelna. Dziękuję!
 ;
Wszystko OK!
Dokumentacja jest czytelna.
Dziękuję.
;
Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
Technical Manual
Beta C360
EXPLODED VIEW
Beta C360 Cabinet � Not for Sale 3 15 10 6 1 7 13 13 14 4 16 5 14
11
8 17 2 16
12 9
ITEM NO. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. ITEM NO. DESCRIPTION QTY. 13. Screw (woofer/faceplate) 20 #8 x 1, PAN, PH ZINC LCS " 14. Screw (terminal cup/level adjuster) 7 PB, OPH, ZINC, #6 x .75" 15. Screw (tweeter mounting) 2 MS, PPH, H/L, BLK, 6-19 x .375" 16. Screw (midrange/network) 10 #6 x .75" PAN, PH, PB, BLK ZINC LCS 17. Bump-on Foot w/Adhesive Backing 4 18. Carton-BetaC360BK 1 Carton-BetaC360BE 1 Carton-BetaC360CH 1 19. Pad - Right & Left - Beta C360 2 20. Owner�s Manual 1 21. 5-Year Warranty Card, Infinity 1
DESCRIPTION Woofer Midrange Tweeter Crossover Assembly Level Adjust Foot Assembly Terminal Cup w/Binding Posts Faceplate, Black (for BK) Faceplate, Gray (for BE & CH) Gasket, Faceplate Assy, Grille, Black Cup, Grille (Black for BK) Cup, Grille (Titanium for BE & CH) Flowerpot, Midrange Plastic Screw (faceplate) #8 x 1, PB, HXS, ZINC "
QTY. 2 1 1 1 1 1 1 1 1 1 8 8 1 8
PART NO. 351512-001 351501-001 351572-001 352096-001 351661-001 338567-001 351903-001 351903-002 351944-001 352066-003 333249-001 333249-003 334072-001 903802-016
PART NO. 900101-012 61867 905401-006 908301-012 330104-001 352170-001 352170-002 352170-003 352171-001 352036-001 335841-003
TO SERVICE THE BETA C360 Remove the grille. 1. Remove the (4) rubber grille retainers on the center section of the front faceplate; this can be accomplished by carefully pulling them out of their cavities with long-nosed pliers or similar tool. 2. Remove the (4) Phillips screws that are now exposed and the (8) Hex screws (5/32 or 4mm) surrounding the woofers. 3. Carefully separate the front faceplate, with tweeter attached, from the cabinet. 4. Woofer: Remove the (4) Phillips screws per driver that are now exposed. 5. Midrange: Remove the (4) Phillips screws that are now exposed. Note the crossover network is not integrated with the rear terminal cup, and must be accessed through the left woofer opening.
Infinity Systems, 250 Crossways Park Drive, Woodbury, New York 11797
4/05
Beta C360
|
|
|
> |
|
